DESCRIPTION
PERMACOAT 6500 is a 100% solids epoxy novolac containment and/or
floor coating system. The PERMACOAT 6500 is specifically
designed as a containment product for industrial solvents and
acids.
The PERMACOAT 6500 consists of two components, resin
and hardener, in both the horizontal and vertical formulations.
Its application is accomplished with rubber squeegees and short
nap paint rollers.
FUNCTION
PERMACOAT 6500 is designed as a 60-250 mil secondary
containment/floor system where exposure to harsh chemicals such
as Nitric Acid, Glacial Acetic Acid, Ethylene Dichloride or
N-Methyl-2-Pyrrolidone are anticipated. PERMACOAT 6500 can be installed over most sound
substrates,
including new or old concrete, and many types of repair
mortar.
TYPICAL
APPLICATIONS
- Sumps
- Trenches
- Chemical process floors
- Tank farm containment
- Chemical loading and unloading
areas
- Drum storage areas
FEATURES
PERMACOAT 6500 containment system allows for fast, easy
applications with minimal downtime.
PERMACOAT 6500 is monolithic and
nonporous, eliminating the most common avenues of
flooring/containment failure (i.e. seams and porosity).
The resinous PERMACOAT 6500 system exhibits very high physical properties, approximately 3-4
times those of standard concrete.
OTHER FEATURES
INCLUDE:
- Low odor
- Non-skid safety finish
- Non-flammable
MIXING
& APPLICATION
For mixing and application information, please refer to the
PERMACOAT 6500 Application Bulletin.
WARRANTY
For product warranty see ChemProof Polymers, Inc.
"Standard Limited Warranty." If one is not included
with this literature contact your local distributor or ChemProof
Polymers, Inc. for a copy.
|
|
TYPICAL
PROPERTIES
|
| Solids, by
Volume |
|
100% |
|
Compressive
Strength
ASTM C579 |
|
12,000 psi |
|
| Flexural
Strength ASTM D790 |
|
14,000 psi |
|
Tensile
Strength
ASTM D307 |
|
10,000 psi |
|
Bond Strength to Concrete
ASTM D4541 |
|
Exceeds
tensile strength of concrete. Failure in concrete |
|
Taber Abrasion
ASTM D4060
CS 17 Wheels |
|
Loss/1000
cycles = 25mg |
|
Hardness Shore D
ASTM D2240 |
|
80 |
|
PACKAGING
& COVERAGE
PERMACOAT 6500 resin and primer are packaged in one and three gallon units. Each
unit consists of pre-measured components, Part A (Resin) and Part B
(Hardener).
Application thickness may
vary from 80-250 mils, depending on the expected
service conditions. Factors to consider are 1) length of
chemical exposure; 2)mechanical abuses; and 3) substrate
texture.
SAFETY
PERMACOAT 6500 contains blended Epoxies as the resin and blended
Amines as the hardener. Protective clothing and gloves are
recommended to prevent sensitization to these materials. In case
of ingestion or eye contact, contact a physician immediately.
MSDS are available for this product upon request.
WHERE PERMACOAT
6500 SHOULD NOT BE INSTALLED
PERMACOAT 6500 should not be applied over substrates:
- subject to hydrostatic
pressure
- which are unsound
- which are contaminated and
cannot be cleaned
- at temperatures below 60oF
(consult ChemProof Polymers)
View
Chemical Resistance Guide
|
